Diagnose and configure modules for the Ford Focus 2 and C-Max I.
Connect to your Ford Focus 2 or C-Max using an ELM327 or ELS27 adapter to access the following modules on the CAN-bus:
Engine Control Unit: View module information, read and clear fault codes, reboot the module, and reset long-term fuel trim (KAM)* for:
ESU-411/418 (1.8L 125 HP / 2.0L 145 HP)
SIM28/29 (1.4L 80 HP / 1.6L 100/115 HP)
ESU-121/131 (1.8L 120 HP / 2.0L 145 HP)
Instrument Cluster: View module information, read and clear fault codes, configure settings, reboot the module, change odometer units, and correct mileage*.
-Brake System: View module information, read and clear fault codes, configure settings, reboot the module, reset DDS calibration, and perform brake bleeding*.
-Comfort Module: View module information, read and clear fault codes, configure settings*, and reboot the module.
-Safety Module: View module information, read and clear fault codes, configure settings, reboot the module, and reset crash data*.
-Transmission Control Module: View module information, read and clear fault codes, and reset KAM*.
-Climate Control Module: View module information, read and clear fault codes.
-Audio Module: View module information, read and clear fault codes, and retrieve radio codes (for M series)*.
*-Selected features require the full version.
To unlock the application's full potential and access additional vehicle modules, a minor modification to your ELM327 adapter is required.
Configure the switch as detailed here:
Http://forffclub.narod.ru/index/0-2
Purchase an ELS27 adapter at: https://els27.ru/. For ELS27USB, set baud rate to 38400; for ELS27BT, use 2,000,000 with the ELS27 Baudrate utility.
